Seachem PhosBond is a revolutionary new product that combines the phosphate-removing capabilities of both aluminium oxide and granular ferric oxide into a singular material, forming a synergistic effect. It rapidly removes phosphates and silicates from saltwater and freshwater, combining the best of both types of phosphate removers. Its high porosity and surface area give it a large binding capacity, while its physical strength and integrity ensure that it will not break down from mechanical stress.
Directions:
For best results, Seachem PhosBond should be rinsed before use and placed so as to maximize the flow of water through it, but not so that it tumbles against itself in flow. It may be used in a canister filter, media chamber, box filter, or any high-flow area of a trickle filter.
Use 60 mL (1/4 cup) for every 200 L (50 US gallons) of saltwater or 400 L (100 US gallons) of freshwater. Leave the product in place for 4 days. If the concentration of the component you are trying to decrease has not dropped to around 0.02 mg/L, then replace the Seachem PhosBond; otherwise, leave in place until levels begin to climb again. As long as concentrations remain under control, the product is not exhausted. Overtreating is not recommended. Seachem PhosBond is not an exchange resin and does not release anything into the water. It does not leach phosphate or silicate back into the water and may be removed, dried, and returned to service until exhausted. Continuous use of small quantities is better than intermittent use of larger quantities.
Seachem PhosBond 250ml
Seachem PhosBond is a revolutionary new product that combines the phosphate-removing capabilities of both aluminium oxide and granular ferric oxide into a singular material, forming a synergistic effect. It rapidly removes phosphates and silicates from saltwater and freshwater, combining the best of both types of phosphate removers. Its high porosity and surface area give it a large binding capacity, while its physical strength and integrity ensure that it will not break down from mechanical stress.
Directions:
For best results, Seachem PhosBond should be rinsed before use and placed so as to maximize the flow of water through it, but not so that it tumbles against itself in flow. It may be used in a canister filter, media chamber, box filter, or any high-flow area of a trickle filter.
Use 60 mL (1/4 cup) for every 200 L (50 US gallons) of saltwater or 400 L (100 US gallons) of freshwater. Leave the product in place for 4 days. If the concentration of the component you are trying to decrease has not dropped to around 0.02 mg/L, then replace the Seachem PhosBond; otherwise, leave in place until levels begin to climb again. As long as concentrations remain under control, the product is not exhausted. Overtreating is not recommended. Seachem PhosBond is not an exchange resin and does not release anything into the water. It does not leach phosphate or silicate back into the water and may be removed, dried, and returned to service until exhausted. Continuous use of small quantities is better than intermittent use of larger quantities.
- Brand: Seachem
- UPC: 000116126106
- Availability: 1
